Includes all hardware necessary for a complete installation
Z17 Evolution Clean Ride ceramic formula keeps Your wheels dust Free
Components are Designed to Match the OE Performance of Your brakes
Rotors use G3000 castings and are 100 percent mill balanced for stock performance and safety
Brake pads tested to ensure noise free braking
Power Stop KOE3053 Autospecialty Front Replacement Brake Kit-OE Brake Rotors & Ceramic Brake Pads Reviews
Installed on front of ’11 Camry. Overall good but for the inner pad position on both sides the pad BARELY fit, and even then only if I drove it in with a rubber mallet. The pad needs to “float” a little and this was wedged into place. Checking the pad landing against the old ones, the new pads were only about .008″ greater across the two landing surfaces. I GENTLY sanded them down with a 3″ abrasive disc in a die grinder until they were .002 to .004″ greater than the old pads, at which point they fit MUCH better. Do not remove too much or the pads may clunk or rattle when you’re not on the brakes.The kit does come with hardware, which was not clear to me in the item description.Beyond that, the rotors are clearly stamped made in India and the misspelling of “1 singal rotor per box” (see photo) doesn’t exactly inspire confidence. But hey, they have Bingle Tigers over there, no?
Rotors are not treated and will begin to rust as soon as installed on the car. One of the rotors was out of balance and caused vibration that increased with speed. It was enough that I pulled the rotors off with less then 500 miles and replaced with OEM Toyota rotors. I would have given them a 1 star but the brake pads were good, came with all replacement clips needed, and were well packaged. Overall I would not recommend unless because of money it’s your only option. They would probably be fine for around town driving at low speeds but if you do any highway driving I would recommend buying a different rotor.
Nice brake kit and easy to install. Took me 5 hours for just a front set because I didnâ€™t have the bolts to force my old rotors off. I beat on one for an hour, even using Pblaster. So take your new rotors to the hardware store to get the proper bolts (youâ€™ll need two) to remove yours. Should be a 12mm bolt head. A Camry factory rotor has these holes. A 2015 F150 doesnâ€™t, unfortunately…
Absolutely The best Ceramic brake pads for 2020; No more brake dust, Brake Noise ðŸ‘ðŸ¼ðŸ‘ðŸ¼ Itâ€™s easy installations & if your still having problems just watch a short video on YouTube on your own specified Vehicles.
I got it for my toyota carmy 2014 SE and works better that OEM parts.